50% OFF! Hot items selling fast—Grab them before they're gone!
The Fluke ST240+ RCD Socket Tester with Beeper checks that each wire in the outlet is properly connected to the building’s electrical system. Via the bright LEDs and included chart, you can quickly and easily verify the wiring of an outlet. Able to identify several common wiring errors, including reversed live and neutral wires and an earth fault, the ST240+ will give you confidence on your next job.
The ST240+ also gives you a unique audible alert anytime voltage is detected. Save time when trying to identify which circuit breaker is connect to which outlet. Just plug the socket tester in, walk to the circuit breaker panel, and listen for the beeper to turn off or on as you flip the breakers. Once it does, youve found the correct breaker. Time and trips saved.
When switched on, the integrated beeper can also alert you to hazardous voltage at the outlet, even if the wiring is incorrect. Working in an office, hospital or other location where you dont want to interrupt others? No problem the beeper can be switched off.
The included RCD test button on the ST240+ Socket Tester with Beeper allows you to also test the operation of RCD outlets. With a single push, the ST240+ can verify the operation of your RCD equipped outlet. If the RCD trips as expected, perfect, you can move on. If not, its time to take a closer look.
The ST240+ has three bright, easy-to-see LED indictors. This lets you see, at a glance, one of six wiring scenarios:
Correct installation
Earth fault
Neutral fault
Live fault
Live/neutral reversed
Live/earth reversed
Simple operation Plug into socket; with the bright, easy-to-see LEDs, verify correct wiring or identify common wiring problems in both standard and RCD outlets
Know more, faster with the handy chart, quickly identify one of six wiring conditions for the outlet
RCD outletswith an integrated RCD test, you can feel secure knowing that your RCD equipped outlets are functioning properly
| Rated operating voltage | 230 V ac +/-10% at 4 mA |
| Wattage | .92 W typical |
| Frequency | 50 Hz |
| Integrated, switchable beeper | Yes |
| RCD test | Yes |
| Indicator lights | 1 red, 2 green LEDs |
| Rating | CAT II 300 V |
| Warranty | Two years |