$51.45
$102.90
50% OFF! Hot items selling fast—Grab them before they're gone!
The L-Blade will be used if there are small distances between the off-cuts.
Note: To ensure the blade will not be jammed in the PCB, the blade should be at least 0.15mm smaller as the milled groove.
Width of Milled Groove:1.5
Recommended Blade Thickneess: 1.35
Length of Blade: 12.0
Length of Cut: 4.7
Free of Compon. on Solder Side:>15
Length of Milled Groove:>13
Width of Off-Cut: 3.0