50% OFF! Hot items selling fast—Grab them before they're gone!
Non-Invasive Digital Moisture Metre
Ensure your timber is properly dried before use and save time, money, and frustration on every project. This non-invasive digital moisture metre provides instant and accurate readings, helping you avoid warping, cupping, or twisting caused by green or wet timber. By measuring moisture deep within the wood without leaving marks or holes, its a fast, reliable tool for every workshop.
As used by the team here at Hammer Roo, this moisture metre gives you confidence that your timber is ready for finishing, gluing, or resin work – no guesswork required.
Timber continues to move as it dries, which can ruin a finished piece or cause resin to crack. While air drying can take roughly one year per 25mm of thickness after the timber has been slabbed, this moisture metre gives you an instant, accurate reading on the spot, helping you know when your timber is ready for use.
The rear sensor emits and receives electromagnetic signals through the material, calculating an average moisture content across the full depth of penetration (up to 20mm). Surface moisture has a greater influence on the reading than deeper moisture, providing a true representation of the timbers condition. The metre performs internal auto-calibration with each reading, so no manual calibration is required.
| Measurement Range | 0%53% (Softwood) / 0%35% (Hardwood) |
| Accuracy | 4% (Softwood/Hardwood) |
| Maximum Measuring Depth | 20mm (inch) |
| Display Type | Backlit green LCD with LED moisture bars |
| Power Supply | 9V battery (included) |